在复杂环境中，移动机器人要安全且无碰撞地避开所有障碍物，对其智能化水平提出了很高的要求。由于障碍物的位置及其几何特征等信息具有随机性，机器人的速度和角速度等控制参数也容易出现随机偏差。为解决工业互联网机器人协作系统中的这一问题，本文提出了一种基于深度学习的移动机器人全局路径控制方案。首先，建立了移动机器人的动力学方程，并根据其线速度和角速度将其运动行为分为避障行为、目标转向行为和目标接近行为。随后，利用深度学习中的神经网络方法构建了机器人的全局路径规划模型。在此基础上，借助模糊控制算法设计了一个模糊控制器，用于修正路径规划过程中出现的偏差，从而实现对机器人全局路径的优化控制。此外，考虑到边缘计算优化，所提出的模型可以在边缘设备上处理局部数据，减少机器人与中央服务器之间的通信负担，提高路径规划的实时性能。实验结果表明，采用本文研究方法控制的移动机器人，路径角度的偏差距离在5厘米以内，偏差收敛可在10毫秒内完成，规划路径更短。这表明该方案能够有效提升工业互联网环境下移动机器人的全局路径规划能力，并通过边缘计算优化促进机器人协作运行。

In a complex environment, for a mobile robot to safely and collision - free avoid all obstacles, it poses high requirements for its intelligence level. Given that the information such as the position and geometric characteristics of obstacles is random, the control parameters of the robot, such as velocity and angular velocity, are also prone to random deviations. To address this issue in the framework of the Industrial Internet Robot Collaboration System, this paper proposes a global path control scheme for mobile robots based on deep learning. First of all, the dynamic equation of the mobile robot is established. According to the linear velocity and angular velocity of the mobile robot, its motion behaviors are divided into obstacle - avoidance behavior, target - turning behavior, and target approaching behavior. Subsequently, the neural network method in deep learning is used to build a global path planning model for the robot. On this basis, a fuzzy controller is designed with the help of a fuzzy control algorithm to correct the deviations that occur during path planning, thereby achieving optimized control of the robot's global path. In addition, considering edge computing optimization, the proposed model can process local data at the edge device, reducing the communication burden between the robot and the central server, and improving the real time performance of path planning. The experimental results show that for the mobile robot controlled by the research method in this paper, the deviation distance of the path angle is within 5 cm, the deviation convergence can be completed within 10 ms, and the planned path is shorter. This indicates that the proposed scheme can effectively improve the global path planning ability of mobile robots in the industrial Internet environment and promote the collaborative operation of robots through edge computing optimization.