在动态任务（如物体捕捉、停靠或与刚体表面接触）中实现稳定的空中操作，通常需要通过阻抗控制实现柔顺行为。成功操作的关键在于阻抗控制能否有效应对空中飞行器与机械臂之间不可避免的耦合作用力。然而，现有的空中机械臂阻抗控制器要么忽略这些耦合作用力（分区系统柔顺方法），要么需要精确了解这些耦合作用力（完整系统柔顺方法）。遗憾的是，这类耦合作用力很难建模，甚至无法建模。为解决这一长期存在的控制难题，我们提出了一种无需先验知识的空中机械臂阻抗控制器，该控制器能够通过适配律处理未知的耦合作用力以及系统参数不确定性。理论分析证明了闭环系统的稳定性，并且在带载荷捕捉场景的实验结果表明，该控制器在整体稳定性和跟踪性能方面显著优于现有基于分区或完整系统柔顺性的阻抗控制器。

Stable aerial manipulation during dynamic tasks such as object catching, perching, or contact with rigid surfaces necessarily requires compliant behavior, which is often achieved via impedance control. Successful manipulation depends on how effectively the impedance control can tackle the unavoidable coupling forces between the aerial vehicle and the manipulator. However, the existing impedance controllers for aerial manipulator either ignore these coupling forces (in partitioned system compliance methods) or require their precise knowledge (in complete system compliance methods). Unfortunately, such forces are very difficult to model, if at all possible. To solve this long-standing control challenge, we introduce an impedance controller for aerial manipulator which does not rely on a priori knowledge of the system dynamics and of the coupling forces. The impedance control design can address unknown coupling forces, along with system parametric uncertainties, via suitably designed adaptive laws. The closed-loop system stability is proved analytically and experimental results with a payload-catching scenario demonstrate significant improvements in overall stability and tracking over the state-of-the-art impedance controllers using either partitioned or complete system compliance.