利用合成暗场X射线显微镜数据，三维重建了变形梯度张量场（映射全部9个张量分量）。由于显微镜的独特性质，我们的结果表明，现在可以非破坏性、原位地对变形场的演化进行成像，并且能够深入到嵌入式晶体元件内部。推导出的回归框架和采样方案基于运动衍射近似，非常适合用于研究塑性变形过程中的微观结构演化。我们确定了在这些条件下，从DFXM图像提取的衍射矢量可以唯一地关联到样品的变形梯度张量场的变形条件。分析得出结论，变形梯度张量场必须沿由X射线束宽和衍射光线路径定义的线段线性变化。所提出的算法针对实际噪声水平进行了数值模拟验证。对单一直刃位错的模拟重构显示，Burgers矢量分量的恢复误差小于2%；重建弹性畸变场的平均绝对误差小于10⁻⁶。通过对弹性畸变场取旋度，得到局部位错密度，从而以亚像素精度确定重构位错核心位置。讨论了直接测量弹性畸变和位错密度张量场在连续位错理论背景下的意义。这种测量结果还可以通过提供指导数据，与连续位错动力学相连接，从而扩展相关模型至有限应变范围。

Deformation gradient tensor fields are reconstructed in three dimensions (mapping all 9 tensor components) using synthetic Dark-Field X-ray Microscopy data. Owing to the unique properties of the microscope, our results imply that the evolution of deformation fields can now be imaged non-destructively, in situ, and within deeply embedded crystalline elements. The derived regression framework and sampling scheme operate under the kinematic diffraction approximation and are well-suited for studying microstructure evolution during plastic deformation. We derive the deformation conditions under which diffraction vectors extracted from DFXM images can be uniquely associated to the deformation gradient tensor field of the sample. The analysis concludes that the deformation gradient tensor field must vary linearly over line segments defined by the X-ray beam width and the diffracted ray path. The proposed algorithms are validated against numerical simulations for realistic noise levels. Reconstructions of a simulated single straight-edge dislocation show that the Burgers vector components can be recovered with an error of <2%. The mean absolute error of the reconstructed elastic distortion field was found to be <10^-6. By taking the curl of the elastic distortion field, local dislocation densities are derived, yielding a reconstructed dislocation core position with sub-pixel accuracy. The significance of directly measuring the elastic distortion and the dislocation density tensor fields is discussed in the context of continuum theory of dislocations. Such measurements can also be interfaced with continuum dislocation dynamics by providing data that can guide the development and validation, thus extending the relevant models to finite strain regimes.