ADITYA L1是印度首个专门用于研究太阳及其大气层从太阳-地球拉格朗日L1点进行观测的任务，于2023年9月2日成功发射，搭载了七个有效载荷。可见发射线日冕仪（VELC）是ADITYA-L1上的主要有效载荷之一。VELC能够同时进行成像和光谱观测（后者在日冕的三条发射线中进行）。可以在5000{\AA}的连续波长下获得日冕图像，视场范围从1.05$R_\odot$到3$R_\odot$，成像间隔取决于可下载的数据量。可以同时对日冕的三条发射线（即5303{\AA} [Fe XIV]、7892{\AA} [Fe XI]和10747{\AA} [Fe XIII]）进行光谱观测，每条线具有不同的曝光时间和采样频率。四个宽度为50${\mu}$m、间距为3.75mm的狭缝可以帮助同时获取日冕中上述所有发射线的四个位置的光谱。线性扫描机构（LSM）使其能够以可变步长扫描日冕至${\pm}$1.5$R_\odot$。该仪器还可以在视场范围1.05-1.5$R_\odot$内进行偏振光谱观测。仪器的各种组件在安装前通过光学台进行了干涉测试。利用激光源和钨灯在实验室中对单个组件进行了对齐，并检查了有效载荷的性能。使用太阳作为光源验证了仪器的波长校准。所有探测器都针对暗电流及其随曝光时间的变化等不同参数进行了校准。本文讨论了VELC的各种特性、对齐方式、校准过程、性能表现、可能的观测结果、初步数据分析以及在轨初期测试的结果。

ADITYA L1, India's first dedicated mission to study Sun and its atmosphere from the Sun-Earth Lagrangian L1 location was successfully launched on September 2, 2023 with seven payloads. Visible Emission Line Coronagraph (VELC) is a major payload on ADITYA-L1. VELC has provision to carry out imaging and spectroscopic observations (the latter in three emission lines of the corona), simultaneously. Images of the solar corona in continuum at 5000{\AA}, with the field of view (FoV) from 1.05$R_\odot$ to 3$R_\odot$ can be obtained at variable intervals depending on the data volume that can be downloaded. Spectroscopic observations of solar corona in three emission lines, namely 5303{\AA} [Fe XIV], 7892{\AA} [Fe XI], and 10747{\AA} [Fe XIII] are possible simultaneously, with different exposure times and cadence. Four slits, each of width 50${\mu}$m, separated by 3.75mm helps to simultaneously obtain spectra at four positions in the solar corona at all the aforementioned lines. A Linear Scan Mechanism (LSM) makes it possible to scan the solar corona up to ${\pm}$1.5$R_\odot$ with variable step size. The instrument has the facility to carry out spectropolarimetric observations at 10747{\AA} also in the FoV range 1.05-1.5$R_\odot$. Various components of the instrument were tested interferometrically on the optical bench before installation. The individual components were aligned and performance of the payload was checked in the laboratory using laser source and tungsten lamp. Wavelength calibration of the instrument was verified using Sun as a light source. All the detectors were calibrated for different parameters such as dark current and its variation with exposure time. Here, we discuss the various features of the VELC, alignment, calibration, performance, possible observations, initial data analysis and results of initial tests conducted in-orbit.