声学驻波声腔中的压力节点对声学介导的组织工程、细胞分析及颗粒操控等应用至关重要。通常情况下，在半波长共振条件下仅会形成单一主节点，其形状和位置受通道尺寸限制。然而，在生物医学应用中，生成额外节点并对其位置和形状加以控制的需求十分强烈，这将显著提升颗粒操控能力。为探索这一潜力，我们通过数值模拟展示了在矩形腔体内，一个圆形散射体旁除主节点外还能形成额外的复杂形状节点。我们识别出三种不同类型的节点：环状节点、凸起节点和新月形节点，其形成取决于散射体的大小、放置于通道中央的位置及其对应的共振频率。这种节点形成的背后机制是内部反射增强，从而促进破坏性干涉以生成节点。为此，我们采用了三个关键概念：采用低宽高比的通道、在通道中央放置刚性圆形散射体，并将所有表面建模为完美反射器。此外，我们分析了散射体对声压和品质因子（定义为每周期储存的声能与阻尼声能之比）的影响。结果显示，在散射体存在的情况下，虽然可以产生额外的节点，但代价是通道内的声压和能量减少。综上所述，本研究为在驻波声腔中利用基频生成复杂节点提供了信息，这对声流控设备中的颗粒操控具有广泛的应用价值。

Acoustic pressure nodes in acoustophoretic devices are crucial for applications in tissue engineering, cell analysis, and particle trapping. Typically, a single primary node forms at the half-wavelength resonance condition, while its shape and position are constrained by the dimensions of the channel. The generation of additional nodes, along with control over their positions and shapes, is highly desirable in biomedical applications and could significantly enhance particle manipulation capabilities. To explore this potential, we numerically demonstrate the formation of additional, complex-shaped, nodes alongside the primary one, by a circular scatterer within a rectangular cavity. We identify three distinct types: ring, protuberant, and crescent nodes, whose formation depends on the size of the scatterer, its placement in the middle of the channel, and its corresponding resonant frequency. The key mechanism behind this formation is the enhancement of internal reflections, increasing destructive interference to promote node generation. To achieve this, we employ three key concepts: using a low-aspect ratio channel, positioning a rigid circular scatterer in the middle of the channel, and modeling all surfaces as perfect reflectors. Furthermore, we analyze the impact of the scatterer on acoustic pressure and quality factor, which is defined as the ratio of stored acoustic energy to damped acoustic energy per cycle. We show that additional nodes emerge in the presence of a scatterer, but they come at the cost of reduced acoustic pressure and energy in the channel. In summary, this study provides information on generating complex nodes in a standing wave acoustic cavity at the fundamental frequency, which has numerous applications for particle manipulation in acoustofluidic devices.