利用反谐振空芯光纤在3 μm超快激光驱动下产生的软X射线高次谐波

Soft X-ray high-harmonic generation in an anti-resonant hollow core fiber driven by a 3 $μ$m ultrafast laser

摘要 Abstract

中红外飞秒激光驱动的高次谐波上转换可以在台式尺度装置中产生相干软X射线束。在此,我们报道了一种由掺镱激光器泵浦的光学参量啁啾脉冲放大(OPCPA)激光系统,该系统由全光纤前端种子,并采用近脉冲通量限制的周期极化铌酸锂(PPLN)非线性介质。该OPCPA系统在1 kHz重复频率下提供波长为3 μm、能量为775 μJ、变换极限120 fs脉宽、衍射极限光束质量以及超高0.33% rms能量稳定性(超过18小时)。利用此激光系统,我们在氩气中通过聚焦到低损耗、高压气体填充的反谐振空芯光纤(ARHCF)中产生软X射线高次谐波(HHG),生成光子能量高达氩L边(250 eV)和碳K边(284 eV)的相干光,具有高光束质量和~1% rms能量稳定性。这项工作展示了在高效引导相位匹配几何中软X射线高次谐波产生的可行性,克服了在无结构波导中传播的中红外高损耗或气体单元或喷射的短相互作用长度的问题。ARHCF可以长期运行而不损坏,并具备用于光谱显微和成像等苛刻应用所需的重复频率、稳定性和鲁棒性。最后,我们讨论了通过在更高激光强度下驱动氦气以提高软X射线高次谐波通量的方法,使用1.5 μm或3 μm(激光信号和闲频波长)。

High-harmonic upconversion driven by a mid-infrared femtosecond laser can generate coherent soft X-ray beams in a tabletop-scale setup. Here, we report on a compact ytterbium-pumped optical parametric chirped pulse amplifier (OPCPA) laser system seeded by an all-fiber front-end and employing periodically-poled lithium niobate (PPLN) nonlinear media operated near the pulse fluence limits of current commercially available PPLN crystals. The OPCPA delivers 3 $\mu$m wavelength pulses with 775 $\mu$J energy at 1 kHz repetition rate, with transform-limited 120 fs pulse duration, diffraction-limited beam quality, and ultrahigh 0.33% rms energy stability over >18 hours. Using this laser, we generate soft X-ray high harmonics (HHG) in argon gas by focusing into a low-loss, high-pressure gas-filled anti-resonant hollow core fiber (ARHCF), generating coherent light at photon energies up to the argon L-edge (250 eV) and carbon K-edge (284 eV), with high beam quality and ~1% rms energy stability. This work demonstrates soft X-ray HHG in a high-efficiency guided-wave phase matched geometry, overcoming the high losses inherent to mid-IR propagation in unstructured waveguides, or the short interaction lengths of gas cells or jets. The ARHCF can operate long term without damage, and with the repetition rate, stability and robustness required for demanding applications in spectro-microscopy and imaging. Finally, we discuss routes for maximizing the soft X-ray HHG flux by driving He at higher laser intensities using either 1.5 $\mu$m or 3 $\mu$m - the signal and idler wavelengths of the laser.